View source for Turret Control Table

[[File:DreyerTurretControlTable_inuse_1918.jpg|thumb|360px|'''Dreyer Turret Control Table c1918'''<br>  ]]
The '''Turret Control Table''', Pattern 6880,<ref>''Turret Dreyer Table as Fitted in the Turrets of H.M. Battleships, and in the Transmitting Stations of Certain Cruisers, 1930''</ref>  was a compact range-only [[Dreyer Fire Control Table]] intended for use should a turret have to resort to local control using only its roof-mounted [[Rangefinder|rangefinder]].{{UKDreyerLocal1913|p. 3}}

[[File:DreyerTurretControlTable_uncovered_1918.jpg|thumb|360px|'''Dreyer Turret Control Table c1918, covers and paper removed.'''<br>No pixies are visible within.  They must be invisible!]]

==Development==
Following a May 1912 request to propose a Dreyer table for local control, Dreyer worked with Elliotts to develop a design from August.{{BrooksDGBJ|p. 169}}  A solid proposal was in hand around October, 1913.{{UKDreyerLocal1913|Fig. 1}}  This range-only table was mounted to the rear bulkhead of the turret to conserve space where it could plot data from the turret's [[Rangefinder|rangefinder]] and to take over if the connection to the {{TS}} were to break down for any reason.

The device as first proposed included a [[Mark IV Dumaresq|Mark IV (or "turret") dumaresq]] which tracked the training angle of the turret,{{UKDreyerLocal1913|p. 4}} a range clock to drive a [[Clock Range|clock range]] pencil on the range plot, an automatic plotter to display cuts triggered from the R.F., and a [[Spotting Corrector|spotting corrector]] to convert clock range to [[Gun Range|gun range]].

One was available for trial in  {{UK-QueenMary}}'s "B" turret by 27 March 1914, which is slightly unusual, as there is no clear indication that her longer-surviving sisters were ever provided these.{{BrooksDGBJ|p. 169}}{{DreyerH|p. 3, and order ''NS14083/14, 27 March 1914, {{TNA|ADM 182/5}}'', thanks to Mark Harris}}

==1913 Design==
The system described in a hand-typed document from 1913 has some features omitted from that design documented in the 1918 Dreyer table handbook, though some may merely be beyond the scope of the second document.  

It featured an automatic range transmitting mechanism which could place its gun range, plus all corrections, directly on the sights.  The device was to use commutators in lieu of manual {{FTP}} for sending its indications on to the sights.  Three cams would be provided for full charge, reduced charge and sub-caliber firing, which is an unusual choice, as the gunsights have such cams as well.  Possibly, this could be explained if those cams were not entirely uniform in scale.  A handle (a mechanical switch?) is mentioned, which might mean these cams did not have to be swapped out, but were all in the housing.

The 1913 design was to have an integral dumaresq, and a second, remotely mounted one for reference of the Officer of Quarters.  His device would provide him a handle by which he can alter the range rate in use on the table's own dumaresq and range clock.  

It was also to feature a time-of-flight corrector (controlled by range and rate &mdash; seemingly a pared-down [[Dreyer Calculator]]) which would automatically inject its correction to the range being transmitted, and have an integral spotting corrector and a remote by which the {{OOQ}} can apply his own corrections.

Mechanical handles to ring fire gongs for left and right guns were to be near the {{OOQ}}.

A COS would permit the turret to choose between ranges coming from this table or those being sent from the {{TS}}.

==1918 Design==

It is unclear whether any tables were delivered in the form described in 1913.  The 1918 design is documented in a much more terse, but much more convincing form, and is generally simpler.  The cloned dumaresqs and spotting correctors were eradicated, with the integral devices being removed.  The automatic transmission of ranges was also stricken, as was the time-of-flight corrector.

===Motive Power===
Just as the large Dreyer tables, the Turret Control Table was powered by an electric motor (20 volts provided by a turbo generator in the turret) with a hand-crank governed by a stopwatch being available should power fail.{{DreyerH|p. 81}}

===Dumaresq===
An adapted, remotely mounted [[Mark IV Dumaresq]] was connected by flexible shafting to the turret training ring, and thereby kept the fore-and-aft bar aligned with own ship's keel.  In this way, and line of bearing was always that of the turret's present training angle.  Except for [[Gun Deflection|deflection]], this was the correct setting for the dumaresq.  The indicated range rate on this dumaresq arrived at the table and set the rate on its integral range clock.  The table's integral dumaresq described in the 1913 document had disappeared.

===Range Clock===
The range clock's familiar variable speed drive (frictional disc spinning at 15 RPM){{DreyerH|p. 82}} was housed within the table (not under the separate dumaresq).  Its rate was indicated both by a pipper in the dial plate of the dumaresq (where it could be moved to track the enemy marker in line of bearing) as well as on a scale on the table where it read against a scale of +/- 2000 yards per minute.{{DreyerH|Plate 38}}

===Bearing Clock===
The tables had no bearing clock, but did not require one.  The dumaresq was set up to portray the line of bearing relative to own ship's keel, and this was driven mechanically by a flexible shaft geared to the turret training ring.  Therefore, as the turret trained about, the dumaresq's bearing was updated to the relative training angle.  This entirely obviated the need for a bearing clock, but relied (of course), on the turret being trained on the enemy.

===Spotting Corrector===
The spotting corrector in the 1918 handbook is significantly different from those on the larger Dreyer tables.  It is smaller, incorporates a five digit [[Gun Range Counter]] (all being single digits, unlike the commonplace 00, 25, 50, 75 standard used elsewhere).  A spotting handle on the side works in corrections, and three hands seem to indicate that it was also able to receive a [[Straddle Correction]].

It lacks any means of conveying the resultant gun range to sights.  Apparently, this would be manually copied over on the turret's local transmitters or simply shouted across on telaupads or voicepipes.

===Range Plot===
The range plot was very compact and similar to the [[Original Dreyer Table]]'s in that the range cuts were plotted "automatically" by a pricker functioning beneath the paper when the man at the rangefinder pressed a pedal.<ref>Pedal mentioned in 1913 document driving a "Bowden Brake" medium, which is described as pneumatic in the 1918 source.</ref>  The range on the turret's rangefinder was conveyed to the table by an {{FTP}} ''link instrument'' at the rangefinder which appears to be a minor adaptation of the [[Range Master Transmitter]].  A two-position lever on the table caused this link to drive the marker across the range plot when it was in the "Auto" position.  When thrown into the "Hand" position, a handle on the table could position the marker, and a knob was pressed in to cause it to prick the paper.  A five digit cyclometric display on the table indicated the position of the marker in yards of range.{{DreyerH|Plate 36}}

If ranges beyond the maximum nominally supported by the range scale were required, it was recommended that the range pencil be tuned down 10,000 yards and that plotting of range cuts be formed by hand.

The paper was 38.5 inches wide (plottable over 37.5 inches) and supplied in rolls 30 feet long.{{DreyerH|pp. 81-2}}

{| border="1" cellpadding="5" cellspacing="0"
|-
| bgcolor=CEDFF2|
| bgcolor=CEDFF2|'''Early tables'''
| bgcolor=CEDFF2|'''Later tables'''
| bgcolor=CEDFF2|'''Tables s/n 81-100'''
|-valign="top"
| Plotting Ranges (yards):
| 2,000 - 17,000
|4,000 - 19,000
|4,000-26,500
|-
| Yards/inch:
|400
|400
|600
|-
| Paper speed (inches/minute):
|2
|2
|4/3
|}

It seems likely to me that the move to increase the minimum range to 4,000 yards probably become ubiquitous by retrofit, and the change in scale and paper speed also a possibility after the war.{{INF}}  At any rate, the Handbook advises that greatly increased ranges should be supported by tuning down the clock range pencil by 10,000 yards and plotting ranges by hand rather than by the automated transmission from the rangefinder.{{DreyerH|p. 81}}

'''Rate Grid'''
The rate grid's wires did not automatically slant to the angle corresponding to the rate on the clock as did the grids on later grids for the larger tables.{{DreyerH|p. 82}}

'''Plotting Range Cuts'''

'''Range Pencil'''
The tables had a single red pencil to plot [[Clock Range|clock range]]. It could be tuned by a hand-wheel.

===Bearing Plot===
The tables featured no bearing plot.  A simple "deflection batten" resembling a slide rule was provided instead.  Presumably, this simply allowed a current deflection correction to be tracked as a form of simple tally board.

==Deployment==
The Dreyer Handbook of 1918 and the 1930 pamphlet for the turret table lists the ships supplied with these tables, essentially battleships from the ''Iron Duke'' class onward, and battlecruisers from ''Tiger'' onward.{{DreyerH|p. 3}}

:'''Capital Ships with Tables in Turrets, 1918'''
::*{{UK-Benbow}}, {{UK-EmperorOfIndia}}, {{UK-IronDuke}}, {{UK-Marlborough}}
::*{{UK-Barham}}, {{UK-Malaya}}, {{UK-QueenElizabeth}}, {{UK-Valiant}}, {{UK-Warspite}}
::*{{UK-Ramillies}}, {{UK-Resolution}}, {{UK-Revenge}}, {{UK-RoyalOak}}, {{UK-RoyalSovereign}}
::* {{UK-Tiger}}
::* {{UK-Renown}}, {{UK-Repulse}}
::* {{UK-Courageous}}, {{UK-Glorious}}

Additionally, it is known that {{UK-QueenMary}} had one in her ''B'' turret in March 1914.<ref name=gfwo>''order NS14083/14, 27 March 1914, {{TNA|ADM 182/5}}'', thanks to Mark Harris.</ref>

{| border=1
!colspan=7|Light Cruisers with Tables in T.S.<br><small><small>* = range plot scale 600 yards per inch</small></small>
|-
!Year by<br>which fitted||Ship
|-
|1918|| 

{|
|[[H.M.S. Ceres (1917)|''Ceres'']]||[[H.M.S. Chester (1915)|''Chester'']] || [[H.M.S. Carysfort (1914)|''Carysfort'']]  || [[H.M.S. Comus (1914)|''Comus'']] || {{AU-Melbourne}}|| [[H.M.S. Royalist (1915)|''Royalist'']] 
|}

|-
|1930|| 

{|
|[[H.M.S. Calliope (1914)|''Calliope'']]|| [[H.M.S. Cambrian (1916)|''Cambrian'']]|| [[H.M.S. Champion (1915)|''Champion'']] || [[H.M.S. Centaur (1916)|''Centaur'']]|| [[H.M.S. Cardiff (1917)|''Cardiff'']]|| [[H.M.S. Cambrian (1916)|''Cambrian'']]
|-
|[[H.M.S. Concord (1916)|''Concord'']]* || [[H.M.S. Canterbury (1915)|''Canterbury'']]* || [[H.M.S. Coventry (1917)|''Coventry'']] || [[H.M.S. Castor (1915)|''Castor'']]|| [[H.M.S. Caledon (1916)|''Caledon'']]|| [[H.M.S. Curacoa (1917)|''Curacoa'']]
|-
|[[H.M.S. Calypso (1917)|''Calypso'']]||[[H.M.S. Curlew (1917)|''Curlew'']]||[[H.M.S. Constance (1915)|''Constance'']] || [[H.M.S. Caradoc (1916)|''Caradoc'']]||[[H.M.S. Cleopatra (1915)|''Cleopatra'']]||[[H.M.S. Conquest (1915)|''Conquest'']]*
|-
|{{AU-Brisbane}}|| {{UK-Dartmouth}}||
|}
|}

It would be interesting to compare these lists against those light cruisers that received the larger and more comprehensive [[Mark III* Dreyer Table]]s in their {{TS}}.  Was it a matter of T.S. size?  Number of rangefinders?  Simple availability of tables?

==Use of the Table==
The 1913 document mentions that three men are required, but that experience may show two may actually suffice.  The numbers would act as follows:{{UKDreyerLocal1913|pp. 13-14}}

# would tune the range clock output to the mean range of the turret's rangefinder (which was to range all the time, whether in Primary or Local Control).  Mention is made that when in Primary Control, the turret's range cuts would be passed to the T.S. after reading them "of the Range Bar of the Fire Control Instrument"
# Keeps the dumaresq (integral one, as in the 1913 design) set as ordered (matching rate indicated from T.S. when in Primary Control), and setting rate on range clock when in Primary
# {{TBCTONE}}

==See Also==
*[[Dreyer Fire Control Table]]

==Footnotes==
{{reflist}}

==Bibliography==
{{refbegin}}
*{{UKDreyerLocal1913}}
*{{DreyerH}}
*{{BrooksDGBJ}}
*{{BrooksThesis}}
*{{THArgoAndDreyer}}
{{refend}}

[[Category:Dreyer Fire Control Table]]
[[Category:Fire Control]]
[[Category:Shipboard Equipment]]